Dial By Saying A Number

• Press the • After the “Ready” prompt and the following beep, say button to begin.

• After the “Ready” prompt and the following beep, say “Dial”.

• The system will prompt you to say the number you want to call.

• For example, you can say “234-567-8901”.

• The Uconnect™ Phone will confirm the phone number and then dial. The number will appear in the display of certain radios.

    See also:

    Parksense Display
    When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. Park Assist System ON Park Assist System OFF The system will indicate a detected obstacle by sho ...

    Driving In Snow, Mud And Sand
    In heavy snow, when pulling a load, or for additional control at slower speeds, shift the transmission to a low gear and shift the transfer case to 4WD LOW if necessary. Refer to “Four-Wheel Dr ...

    Front Panel(s) Installation
    NOTE: Set the panels on the windshield frame so that there is no overhang. Also, make sure that the panels are sitting flush with the body. 1. Install the right panel first, then the left panel. 2 ...