To Lower The Rear Seat
1. Locate the release strap on the lower outboard side of each rear seatback.
2. Pull the release strap (toward the front of the vehicle).

Rear Seat Release Strap
3. Fold the rear seat completely forward.
4. If desired, push down on the seatback to lock it in the folded position.
See also:
Adding Fluid
Fluid should be added only at filler hole until fluid begins to run out of the
hole. ...
Totally Integrated Power Module
The Totally Integrated Power Module is located in the
engine compartment. This center contains cartridge fuses
and mini fuses. A description of each fuse and component
may be stamped on the insi ...
Tire Chains (Traction Devices)
Use of traction devices require sufficient tire-to-body
clearance. Follow these recommendations to guard
against damage.
• Install on Rear Tires Only
• Due to limited clearance, use SAE cla ...


