Brake/Transmission Shift Interlock System
This vehicle is equipped with a Brake Transmission Shift Interlock (BTSI) that holds the shift lever in the PARK position unless the brakes are applied. To move the shift lever out of the PARK position, the ignition switch must be turned to the ON/RUN or START position (engine running or not) and the brake pedal must be pressed.
See also:
Setting the Tone, Balance, and Fade
Push the rotary TUNE/SCROLL control knob and BASS will display. Turn the TUNE/SCROLL
control knob to the right or left to increase or decrease the bass tones.
Push the rotary TUNE/SCROLL control kn ...
Front Panel(s) Installation
NOTE: Set the panels on the windshield frame so that there is no overhang.
Also, make sure that the panels are sitting flush with the body.
1. Install the right panel first, then the left panel.
2 ...
Rear Hard Top Installation
NOTE: If the door frames are installed from soft top usage, they must be removed
prior to installation of the hard top.
1. Inspect the hard top seals for damage and replace if necessary.
2. Instal ...