Onboard Diagnostic System — OBD II
Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems are operating properly, your vehicle will provide excellent performance and fuel economy, as well as engine emissions well within current government regulations.
If any of these systems require service, the OBD II system will turn on the “Malfunction Indicator Light (MIL).” It will also store diagnostic codes and other information to assist your service technician in making repairs. Although your vehicle will usually be drivable and not need towing, see your authorized dealer for service as soon as possible.
CAUTION!
• Prolonged driving with the MIL on could cause
further damage to the emission control system. It
could also affect fuel economy and drivability. The
vehicle must be serviced before any emissions
tests can be performed.
• If the MIL is flashing while the engine is running, severe catalytic converter damage and power loss will soon occur. Immediate service is required.
See also:
Ignition Off Operation
The power sunroof switches remain active for up to
approximately ten minutes after the ignition switch has
been turned OFF. Opening either front door will cancel
this feature. The time is progra ...
Hazard Warning Flashers
The Hazard Warning flasher switch is located on the instrument panel below the
climate controls.
Press the switch to turn on the Hazard Warning flasher. When the switch is activated,
all direct ...
With Tip Start – Automatic Transmission Only
If the engine fails to start after you have followed the “Normal Starting” or
“Extreme Cold Weather” procedures, it may be flooded. To clear any excess fuel,
push the accelerator pedal all ...


