Disc
To switch to the disc mode, say “Disc”. In this mode, you
may say the following commands:
• “Track” (#) (to change the track)
• “Next Track” (to play the next track)
• “Previous Track” (to play the previous track)
• “Main Menu” (to switch to the main menu)
See also:
Customer Key Programming
If you have two valid Sentry Keys , you can program new Sentry Keys to the system
by performing the following procedure:
1. Cut the additional Sentry Key Transponder blank(s) to match the ignition ...
Quadra-Lift™ – If Equipped
When off-roading, it is recommended that the lowest
useable vehicle height that will clear the current obstacle
or terrain be selected. The vehicle height should then be
raised as required by th ...
If You Stall Or Begin To Lose Headway
If you stall or begin to lose headway while climbing a steep hill, allow your
vehicle to come to a stop and immediately apply the brake. Restart the engine and
shift into REVERSE. Back slowly down ...