Important Notes For Single Video Screen System
• VES™ is able to transmit two channels of stereo audio simultaneously.
• In split screen mode the left side equates to Channel 1 and right side equates to Channel 2.
• If a video source is selected on Channel 1, then Channel 2 is for audio only. Selecting a video source (DVD) will not show the video on the screen.
• When selecting a video source on Channel 1, the video will display on the screen and the audio could be heard on Channel 1 in the headphones.
• Audio can be heard through the headphones even when the Video Screen is closed
See also:
Controlling The iPod Or External USB Device Using Radio Buttons
To get into the iPod /USB/MP3 control mode and access a connected audio device,
either press the “AUX” button on the radio faceplate or press the VR button and
say USB or Switch to USB . Once ...
Information Mode Display
Information Mode Video Screen Display
1. Channel 1 Mode
2. Channel 1 Shared Status
3. Channel 1 Audio Only/Mute
4. Channel 2 Mode
5. Channel 2 Shared Status
6. Channel 2 Audio Only/Mute
...
Changing FCW Status
The FCW feature can be set to far, set to near or turned off
in the Electronic Vehicle Information Center (EVIC) refer
to “Electronic Vehicle Information Center (EVIC)” in
“Understanding Y ...