Rating and Password Setup

The Rating and Password settings work together to control the types of DVDs that your family watches. Most DVD-Video discs have a rating (from 1 to 8) assigned to them where lower numbers are designated for all audiences and higher numbers are designated for more adult audiences.

When a DVD-Video disc is loaded, its rating is compared to the setting in the DVD player. If the rating of the disc is higher than the setting in the player, a Password screen is displayed. In order to watch the disc, the rear passenger must enter the correct password using the password entry method described below.

To play all discs without requiring a password, set the DVD player’s rating to Level 8. Setting the rating to Level 1 always requires the password to play any DVD disc.

Not all DVD discs encode a Rating, so it is still possible that discs designed for adult audiences can still play without requiring a password.

The default rating is Level 8 (play all discs without a password) and the default password is 0000.

DVD Password Entry
DVD Password Entry

To set the password, activate the DVD Setup Menu and follow these additional instructions:

• Using the remote control Left and Right cursor buttons, select the Rating tab.

• Highlight Change Password , and then press the remote control’s ENTER button.

• Enter the current password. Select a digit, use the remote control Up and Down cursor buttons to set the value for the current digit, and then press the remote control’s Right cursor button to select the next digit.

Repeat this digit selection sequence for all four digits.

• After the four-digit password is entered, press the remote control’s ENTER button. If the password is correct, the set password screen is displayed.

• Using the remote control’s Up and Down cursor buttons to set the value for the current digit and the remote control’s Right cursor button to select digits, enter the new password.

• After the four-digit password is entered, press the remote control’s ENTER button to accept the change.

DVD Player Level Menu
DVD Player Level Menu

To set the rating, activate the DVD Setup Menu and follow these additional instructions:

• Using the remote control’s Left and Right cursor buttons, select the Rating tab.

• Highlight Change Rating , and then press the remote control’s ENTER button.

• Enter the current password. Select a digit, use the remote control’s Up and Down cursor buttons to set the value for the current digit, and then press the remote control’s Right cursor button to select the next digit. Repeat this digit selection sequence for all four digits.

• After the four-digit password is entered, press the remote control’s ENTER button. If the password is correct, the Rating Level menu is displayed.

• Using the remote control’s Up and Down cursor buttons, select the new rating level, and then press the remote control’s ENTER button to accept the change.

    See also:

    Tire Chains
    Tire chains may be installed on all models except the Sahara and Rubicon. Install chains on rear tires only. Follow these recommendations to guard against damage and excessive tire and chain wear ...

    In Canada
    If you believe that your vehicle has a safety defect, you should contact the Customer Service Department immediately. Canadian customers who wish to report a safety defect to the Canadian governm ...

    If Your Engine Overheats
    In any of the following situations, you can reduce the potential for overheating by taking the appropriate action. • On the highways — slow down. • In city traffic — while stopped, place t ...