Halogen Headlamps – If Equipped
1. Open the hood.
2. Turn the low or high beam bulb one–quarter turn counterclockwise to remove from housing.
3. Disconnect the electrical connector and replace the bulb.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
See also:
Add Names To Your Uconnect™ Phonebook
NOTE: Adding names to the Uconnect™ Phonebook is
recommended when the vehicle is not in motion.
• Press the button to begin.
• After the “Ready” prompt and the following beep, say
“ ...
American Petroleum Institute (API) Engine Oil Identification Symbol
This symbol means that the oil has been certified by the American Petroleum Institute
(API). The manufacturer only recommends API Certified engine oils.
CAUTION!
Do not use chemical flushes in y ...
When To Use 4L (Low) Range
When off-road driving, shift into 4L (Low) for additional traction and control
on slippery or difficult terrain, ascending or descending steep hills, and to increase
low speed pulling power. This ...