See also:

Front Fog Lamps
1. Reach through the cutout in the splash shield and disconnect the wiring harness from the fog lamp connector. 2. Firmly grasp the bulb by the two latches and squeeze them together to unlock the ...

Front Park/Turn Signal
1. Remove the front grille. Turn the retainers along the top 1/4 turn counterclockwise and remove. 2. Pull the bottom of the grille away starting at one side and working toward the other. 3. Tur ...

Programming A Non-Rolling Code
For programming Garage Door Openers manufactured before 1995. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink ...