Fold And Tumble Rear Seat — Two-Door Models

NOTE:
• Prior to folding the rear seat, it may be necessary to reposition the front seats.

• Be sure that the front seats are fully upright and positioned forward. This will allow the rear seat to fold down easily.

1. Lift the seatback release lever and fold the seatback forward.

Rear Seat Release
Rear Seat Release

2. Slowly flip the entire seat forward.

Folding Rear Seat
Folding Rear Seat

3. Return the seat to the normal position.

4. Raise the rear seatback using the assist strap and firmly lock the seat into position.

    See also:

    Power Lumbar — If Equipped
    Vehicles equipped with power driver or passenger seats are also equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to i ...

    Brake Master Cylinder
    The fluid level in the master cylinders should be checked whenever the vehicle is serviced. If necessary, add fluid to bring level to the full level mark on the side of the reservoir of the brake ...

    Operating Instructions — Radio Mode
    NOTE: The ignition switch must be in the ON/RUN or ACC position to operate the radio. ...