Jacking And Tire Changing
WARNING!
• Do not attempt to change a tire on the side of the vehicle close to moving traffic.
Pull far enough off the road to avoid the danger of being hit when operating the
jack or changing the wheel.
• Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
• Never start or run the engine while the vehicle is on a jack.
• The jack is designed to be used as a tool for changing tires only. The jack should not be used to lift the vehicle for service purposes. The vehicle should be jacked on a firm level surface only.
Avoid ice or slippery areas.
See also:
Operation
Voice commands can be used to operate the Uconnect™ Phone and to navigate through
the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™
Phone prompts. You will ...
Glass Surfaces
All glass surfaces should be cleaned on a regular basis with MOPAR Glass Cleaner
or any commercial household-type glass cleaner. Never use an abrasive-type cleaner.
Use caution when cleaning insid ...
Department Of Transportation Uniform Tire Quality Grades
The following tire grading categories were established by
the National Highway Traffic Safety Administration. The
specific grade rating assigned by the tire’s manufacturer
in each category is ...