Once A Month
• Check tire pressure and look for unusual wear or damage.
• Inspect the battery and clean and tighten the terminals as required.
• Check the fluid levels of coolant reservoir, brake master cylinder, power steering and transmission and add as needed.
• Check all lights and other electrical items for correct operation.
See also:
To Vary The Speed Setting
When the Electronic Speed Control is set, you can increase speed by pushing the
RES (+) button. If the button is continually pressed, the set speed will continue
to increase until the button is re ...
Introduction
Congratulations on selecting your new Chrysler Group
LLC vehicle. Be assured that it represents precision
workmanship, distinctive styling, and high quality - all
essentials that are traditional ...
Normal Starting
NOTE: Normal starting of either a cold or a warm engine is obtained without
pumping or pressing the accelerator pedal.
Turn the ignition switch to the START position and release when the engine sta ...