Setup

To switch to system setup, you may say on of the following:
• “Change to setup”
• “Switch to system setup”
• “Change to setup”
• “Main menu setup” or
• “Switch to setup”

In this mode, you may say the following commands:
• “Language English”
• “Language French”
• “Language Spanish”
• “Tutorial”
• “Voice Training”

NOTE: Keep in mind that you have to press the Voice Command for the beep before button first and wait for the beep before speaking the “Barge In” commands.

    See also:

    Satellite Radio
    To switch to satellite radio mode, say “Sat” or “Satellite Radio”. In this mode, you may say the following commands: • “Channel Number” (to change the channel by its spoken number) ...

    Front Side Marker
    1. Reach under the front fender flare and locate the front side marker socket. 2. Turn the socket assembly counterclockwise 1/3 turn and remove it from the housing. Pull the bulb straight from the ...

    To Vary The Speed Setting
    While ACC is set, you can increase the set speed by pressing and holding the RES + button. If the button is continually pressed, the set speed will continue to increase in 5 mph (8 km/h) increme ...