Turning Parkview On Or Off — Without Navigation/Multimedia Radio
1. Press the “menu” hard-key.
2. Select “system setup” soft-key.
3. Enable or disable the rear camera feature by selecting “enable rear camera in reverse” soft-key and pressing the “save” soft-key.
See also:
Curb Weight
The curb weight of a vehicle is defined as the total weight of the vehicle with
all fluids, including vehicle fuel, at full capacity conditions, and with no occupants
or cargo loaded into the vehi ...
Operating Instructions - Uconnect™ Multimedia (Satellite) Mode
NOTE: The ignition switch must be in the ON/RUN or ACC position to operate
the radio.
SEEK Buttons
Press and release the SEEK buttons to search for the next channel in Satellite
mode. Press the ...
Automatic Locking Retractor Mode (ALR) — If Equipped
In this mode, the shoulder belt is automatically prelocked.
The belt will still retract to remove any slack in
the shoulder belt. The Automatic Locking Mode is available
on all passenger-seating ...


