Compass Variance
Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differences the variance should be set for the zone where the vehicle is driven, per the zone map. Once properly set, the compass will automatically compensate for the differences, and provide the most accurate compass heading. For the most accurate compass performance, the compass must be set using the following steps.
NOTE: Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Mobile Phones, Laptops and Radar Detectors. This is where the compass module is located, and it can cause interference with the compass sensor, and it may give false readings.

Compass Variance Map
1. Turn the ignition switch ON.
2. Press the UP or DOWN button until the Setup (Customer-Programmable Features) menu is reached, then press the SELECT button.
3. Press the DOWN button until the “Compass Variance” message is displayed in the EVIC, then press the SELECT button. The last variance zone number displays in the EVIC.
4. Press and release the SELECT button until the proper variance zone is selected, according to the map.
5. Press and release the BACK button to exit.
See also:
SAFETY
The Wrangler Unlimited has two sets of lower Latch anchors in the outboard
seats. The outer Latch anchors were easy to use, but the inner anchors in both
positions sat right behind the seat belt b ...
Hydraulic Clutch Fluid – Manual Transmission
The clutch hydraulic system is fed by a segregated volume of fluid within the
brake system master cylinder reservoir. In the event of leakage or wear, use only
manufacturer’s recommended brake f ...
Cargo
Just looking at the rear cargo area of the Liberty, it sure doesn't look big.
The Dodge Nitro seems more cavernous even though the two are nearly identical
when you compare the numbers. The Libert ...


