Engine Block Heater — If Equipped

The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded, three-wire extension cord.

The engine block heater cord is located:

• 3.6L Engine – coiled and strapped to the engine oil dipstick tube.

• 5.7L Engine – bundled and fastened to the injector harness.

The engine block heater must be plugged in at least one hour to have an adequate warming effect on the engine.

WARNING!
Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt electrical cord could cause electrocution.

    See also:

    Exterior
    I love the clean, boxy, rugged look of the Liberty. From its big, round headlights to its chunky tires, the Liberty screams "Jeep." Its abrupt exterior angles contribute to the Liberty's ...

    After Driving Off-Road
    Off-road operation puts more stress on your vehicle than does most on-road driving. After going off-road, it is always a good idea to check for damage. That way you can get any problems taken care ...

    Bluetooth Streaming Audio (BTSA)
    Music can be streamed from your cellular phone to the Uconnect™ phone system. Controlling BTSA Using Radio Buttons To get into the BTSA mode, press either “AUX” button on the radio or press th ...