Front Turn Signal
1. Open the hood.
2. Turn the turn signal bulb one–quarter turn counterclockwise to remove from housing.
3. Disconnect the electrical connector and replace the bulb.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
See also:
Main Menu
Start a dialogue by pressing the Voice Command
button. You may say “Main Menu” to
switch to the main menu.
In this mode, you can say the following commands:
• “Radio” (to switch to the ...
Towing A Disabled Vehicle
This section describes procedures for towing a disabled vehicle using a commercial
wrecker service. If the transmission and drivetrain are operable, disabled vehicles
may also be towed as describe ...
Full Size Spare – If Equipped
The full size spare is for temporary emergency use only.
This tire may look like the original equipped tire on the
front or rear axle of your vehicle, but it is not. This spare
tire may have limi ...