See also:

Side Step Removal – If Equipped
NOTE: Prior to off-road usage, the side steps should be removed to prevent damage. 1. Remove the two nuts from the bodyside. 2. Remove one bolt from the underside of the vehicle. 3. Remove th ...

Closing Sunroof — Manual Mode
To close the sunroof, press and hold the switch in the forward position. Any release of the switch will stop the movement and the sunroof will remain in a partially closed condition until the sw ...

Programming A Non-Rolling Code
For programming Garage Door Openers manufactured before 1995. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink ...