Vehicle Info (Customer Information Features)
Press and release the UP or DOWN button until “Vehicle Info” displays in the EVIC and press the SELECT button.
Press the UP and DOWN button to scroll through the available information displays, then press SELECT to display any one of the following choices.
• Coolant Temp
Displays the actual coolant temperature.
• Oil Temperature
Displays the actual oil temperature.
• Oil Pressure
Displays the actual oil pressure.
• Trans Temperature
Displays the actual transmission temperature.
• Engine Hours
Displays the number of hours of engine operation.
See also:
Closing Power Shade — Manual Mode
To close the shade, press and hold the switch in the
forward position. Any release of the switch will stop the
movement and the shade will remain in a partially closed
condition until the switch ...
Engine Oil Viscosity (SAE Grade)
SAE 5W-30 engine oil is recommended for all operating temperatures. This engine
oil improves low temperature starting and vehicle fuel economy.
The engine oil filler cap also shows the recommended ...
Front Axle Fluid Level Check
The front axle oil level needs to be between 1/8 in (3 mm)
below the bottom of the fill hole and the bottom of the fill
hole.
The front axle fill and drain plugs should be tightened to
22 to 29 ...


