Auto Unlock Doors

When this feature is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK or NEUTRAL position and the driver’s door is opened. To make your selection, press and release the SELECT button until a check-mark appears next to the feature showing the system has been activated, or the check-mark is removed showing the system has been deactivated.

    See also:

    Fluid Level Check
    The fluid level should be to the bottom edge of the fill hole (1) when the vehicle is in a level position. 1 — Fill Plug 2 — Drain Plug ...

    Operating Information And Precautions
    The Selec-Trac II active on-demand transfer case provides four positions: • Two-wheel drive (2WD) high range • Four-wheel drive Auto (4WD AUTO) high range • Neutral (N) • Four-wheel ...

    Uconnect™ Phone Button
    The radio or steering wheel controls (if equipped) will contain the two control buttons (Uconnect™ Phone button and Voice Command button) that will enable you to access the system. When yo ...