Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines

If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, a loose gascap indicator will display in the EVIC telltale display area.

Refer to “Electronic Vehicle Information Center (EVIC)” in “Understanding Your Instrument Panel” for further information. Tighten the fuel filler cap properly and press the SELECT button to turn off the message. If the problem continues, the message will appear the next time the vehicle is started.

    See also:

    Headlamp
    1. Open hood and support using prop rod. 2. Remove the front grille. Turn the retainers along the top 1/4 turn counterclockwise and remove. 3. Pull the bottom of the grille away starting at one si ...

    Preparations For Jump-Start
    The battery in your vehicle is located in the right rear of the engine compartment, behind the Power Distribution Center. Positive Battery Post WARNING! • Take care to avoid the radiator cool ...

    Programming The Memory Feature
    To create a new memory profile, perform the following: NOTE: Saving a new memory profile will erase an existing profile from memory. 1. Turn the ignition ON. 2. Adjust all memory profile settings ...