Washing
• Wash your vehicle regularly. Always wash your vehicle in the shade using MOPAR Car Wash or a mild car wash soap, and rinse the panels completely with clear water.
• If insects, tar, or other similar deposits have accumulated on your vehicle, use MOPAR Super Kleen Bug and Tar Remover or equivalent to remove.
• Use a high quality cleaner wax, such as MOPAR Cleaner Wax to remove road film, stains, and to protect your paint finish. Take care never to scratch the paint.
• Avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish.
CAUTION!
• Do not use abrasive or strong cleaning materials
such as steel wool or scouring powder, which will
scratch metal and painted surfaces.
• Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals.
See also:
Selection Of Lubricant
It is important that the proper lubricant is used in the
transmission to assure optimum transmission performance.
Use only manufacturer’s recommended transmission
fluid. Refer to “Fluids, Lub ...
Driving Up Hill
Once you have determined your ability to proceed and have shifted into the appropriate
gear, line your vehicle up for the straightest possible run. Accelerate with an
easy constant throttle and ap ...
Commandview Sunroof With Power Shade — If Equipped
The CommandView sunroof switch is located to the left
between the sun visors on the overhead console.
The power shade switch is located to the right between
the sun visors on the overhead console ...