At Each Oil Change

• Change the engine oil filter.

• Inspect the brake hoses and lines.

• Check the manual transmission fluid level.

CAUTION!
Failure to perform the required maintenance items may result in damage to the vehicle.

    See also:

    Customer Key Programming
    If you have two valid Sentry Keys , you can program new Sentry Keys to the system by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignit ...

    Linking And Unlinking The Remote Keyless Entry Transmitter To Memory
    Your Remote Keyless Entry (RKE) transmitters can be programmed to recall one of two pre-programmed memory profiles with a press of the UNLOCK button on the RKE transmitter. To program your RKE ...

    Automatic Unlock Doors On Exit Programming
    The “Automatic Unlock Doors On Exit” feature can be enabled or disabled as follows: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON/ RUN an ...