Answer Or Reject An Incoming Call — No Call Currently In Progress
When you receive a call on your mobile phone, the
Uconnect™ Phone will interrupt the vehicle audio system,
if on, and will ask if you would like to answer the
call. Press the 
button to accept
the call. To reject the
call, press and hold the button
until you hear a single
beep, indicating that the incoming call was rejected.
See also:
When To Use 4L (Low) Range
When off-road driving, shift into 4L (Low) for additional traction and control
on slippery or difficult terrain, ascending or descending steep hills, and to increase
low speed pulling power. This ...
Enhanced Accident Response System
In the event of an impact causing air bag deployment, if
the communication network remains intact, and the
power remains intact, depending on the nature of the
event the ORC will determine wheth ...
Turning Parkview On Or Off — With Navigation/Multimedia Radio
1. Press the “menu” hard-key.
2. Select “system setup” soft-key.
3. Press the “camera setup” soft-key.
the “enable rear camera in reverse” soft-key.
5. Press the “save” soft-ke ...