See also:

Front Fog Lamps
1. Reach through the cutout in the splash shield and disconnect the wiring harness from the fog lamp connector. 2. Firmly grasp the bulb by the two latches and squeeze them together to unlock the ...

Rear Tail/Stop, Turn Signal, And Back-Up Lamp
1. Open the liftgate. 2. Remove the screws that fasten the taillamp housing to the vehicle. 3. Pull the taillamp housing straight back to separate it from the vehicle. 4. Disconnect the elect ...

Brake Master Cylinder
The fluid level in the master cylinders should be checked whenever the vehicle is serviced. If necessary, add fluid to bring level to the full level mark on the side of the reservoir of the brake ...