See also:

Rear Liftgate Mounted Tail Lamp
1. Raise the liftgate. 2. Use a fiber stick or flat blade screw driver to pry the lower trim from the liftgate. 3. Once lower trim is loose, close the liftgate. 4. Open the flipper glass. 5. Pul ...

Door Frame Installation — Two-Door Models
1. Unfold door frame and unscrew thumbscrews. 2. Set the door frame pin into the hole on top of the body side, behind the door opening. 3. After the door frame pin has been set into the body sid ...

Preparations For Jacking
1. Park the vehicle on a firm, level surface. Avoid ice or slippery surfaces. WARNING! Do not attempt to change a tire on the side of the vehicle closest to moving traffic, pull far enough off ...