Cooling System
To reduce potential for engine and transmission overheating, take the following actions:
− City Driving
When stopped for short periods of time, shift the transmission into NEUTRAL and increase engine idle speed.
− Highway Driving
Reduce speed.
− Air Conditioning
Turn off temporarily.
See also:
Putting Up The Soft Top
NOTE: Be extremely careful when putting up the soft top to prevent the doors
from getting scratched. It may be helpful to open the rear doors.
1. Install the door frames, if removed. Refer to “Do ...
Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/
shoulder belt.
1. Position the latch plate as close as possible to the
anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the latch pl ...
Driver’s Power Seat — If Equipped
The power seat switch is located on the outboard side of
the seat near the floor. Use this switch to move the seat up
or down, forward or rearward or to tilt the seat.
Power Seat Switch
Adjust ...