See also:

Drain
First remove the fill plug (B), then the drain plug (C). The recommended tightening torque for the drain and fill plugs is 15 to 25 ft lbs (20 to 34 N·m). CAUTION! When replacing the plugs, do no ...

Hazard Warning Flashers
The Hazard Warning flasher switch is located on the instrument panel below the climate controls. Press the switch to turn on the Hazard Warning flasher. When the switch is activated, all direct ...

Engine Block Heater — If Equipped
The engine block heater warms the engine, and permits quicker starts in cold weather. Connect the cord to a standard 110-115 Volt AC electrical outlet with a grounded, three-wire extension cord. ...