Cleaning Headlights
Your vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights.
Plastic is not as scratch resistant as glass and therefore different lens cleaning procedures must be followed.
To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution followed by rinsing.
Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses.
See also:
Rear License Lamp
1. Use a screw driver to gently pry against the side of the
snap tab to remove the license lamp lens.
2. Pull bulb from socket.
3. Replace bulb.
4. Reinstall lens. ...
Fluid Level Check
Lubricant should be at the bottom edge of the oil fill hole. ...
Sky Slider™ Control
The Sky Slider™ switch is located between the sun visors
on the overhead console.
Sky Slider™ Switch
NOTE: The Sky Slider™ switch will operate when the
ignition switch is turned to the O ...


