See also:

Programming A Non-Rolling Code
For programming Garage Door Openers manufactured before 1995. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink ...

Drain
First remove the fill plug (B), then the drain plug (C). The recommended tightening torque for the drain and fill plugs is 15 to 25 ft lbs (20 to 34 N·m). CAUTION! When replacing the plugs, do no ...

Towing With HSA
HSA will provide assistance when starting on a grade when pulling a trailer. WARNING! • If you use a trailer brake controller with your trailer, your trailer brakes may be activated and dea ...