To Turn Off

The system will turn off and erase the set speed in memory if:

• You push the ON/OFF button.

• You turn OFF the ignition.

• You switch to Four-Wheel Drive Low.

    See also:

    Brake Master Cylinder
    The fluid level in the master cylinders should be checked whenever the vehicle is serviced. If necessary, add fluid to bring level to the full level mark on the side of the reservoir of the brake ...

    Side Step Removal – If Equipped
    NOTE: Prior to off-road usage, the side steps should be removed to prevent damage. 1. Remove the two nuts from the bodyside. 2. Remove one bolt from the underside of the vehicle. 3. Remove th ...

    Shifting Out Of NEUTRAL (N)
    Use the following procedure to prepare your vehicle for normal usage. 1. Bring the vehicle to a complete stop, leaving it connected to the tow vehicle. 2. Firmly apply the parking brake. 3. Tur ...