Parksense Sensors
The four ParkSense sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximately 12 in (30 cm) up to 79 in (200 cm) from the rear fascia/bumper in the horizontal direction, depending on the location, type and orientation of the obstacle.
See also:
Side Step Removal – If Equipped
NOTE: Prior to off-road usage, the side steps should be removed to prevent
damage.
1. Remove the two nuts from the bodyside.
2. Remove one bolt from the underside of the vehicle.
3. Remove th ...
What Causes Corrosion?
Corrosion is the result of deterioration or removal of paint and protective coatings
from your vehicle.
The most common causes are:
• Road salt, dirt and moisture accumulation.
• Stone and gr ...
Notes On Playing MP3/WMA Files
The radio can play MP3/WMAfiles; however, acceptable MP3/WMAfile recording media
and formats are limited.
When writing MP3/WMA files, pay attention to the following restrictions. ...