Display Fuel Saver — If Equipped
The “ECO” message is located in the Compass/ Temperature display; this message can be turned on or off. To make your selection, press and release the SELECT button until a check-mark appears next to the setting, showing that the setting has been selected.
See also:
Front Axle Fluid Level Check
The front axle oil level needs to be between 1/8 in (3 mm)
below the bottom of the fill hole and the bottom of the fill
hole.
The front axle fill and drain plugs should be tightened to
22 to 29 ...
Manual Compass Calibration
If the compass appears erratic and the “CAL” indicator does not appear in the
EVIC display, you must put the compass into the Calibration Mode manually as follows:
1. Start the engine. Leave th ...
Display Fuel Saver — If Equipped
The “ECO” message is located in the compass / outside temperature / audio information
/ ECO display. If Display Fuel Saver is selected as ON, only the ECO message will
display in the audio inf ...


