Disc Errors
If the DVD player is unable to read the disc, a Disc Error message is displayed on the VES™ and Radio displays and the disc is automatically ejected.Adirty, damaged, or incompatible disc format are all potential causes for a Disc Error message.
If a disc has a damaged track which results in audible or visible errors that persists for 2.0 seconds, the DVD player will attempt to continue playing the disc by skipping forward 1.0 to 3.0 seconds at a time. If the end of the disc is reached, the DVD player will return to the beginning of the disc and attempt to play the start of the first track.
The DVD player may shut down during extremely hot conditions, such as when the vehicle’s interior temperature is above 120°F. When this occurs, the DVD player will display VES High Temp and will shut off the VES™ displays until a safe temperature is reached. This shutdown is necessary to protect the optics of the DVD player.
See also:
Shifting Out Of NEUTRAL (N)
Use the following procedure to prepare your vehicle for
normal usage.
1. Bring the vehicle to a complete stop, leaving it connected
to the tow vehicle.
2. Firmly apply the parking brake.
3. Tur ...
Operating Instructions — Radio Mode
NOTE: The ignition switch must be in the ON or ACC position to operate the
radio. ...
To Exit Remote Start Mode And Drive The Vehicle
Before the end of the 15-minute cycle, press and release the UNLOCK button on
the RKE transmitter to unlock the doors and disarm the Vehicle Security Alarm (if
equipped). Then, insert the key into ...


