Quadra-Trac I Operating Instructions/Precautions – If Equipped

The Quadra-Trac I is a single-speed (HI range only) transfer case, which provides convenient full-time fourwheel drive. No driver interaction is required. The Brake Traction Control (BTC) System, which combines standard ABS and Traction Control, provides resistance to any wheel that is slipping to allow additional torque transfer to wheels with traction.

NOTE: The Quadra-Trac I system is not appropriate for conditions where 4WD LOW range is recommended.

Refer to “Off-Road Driving Tips” in “Starting and Operating” for further information.

    See also:

    Right-sized Packaging
    The vehicle's 114.8-inch wheelbase is 5.3 inches longer than the model it replaces and contributes to an overall vehicle length that is 1.8 inches longer than the prior model. The longer wheelbase ...

    Using Operator Mode
    If the Sky Slider™ is open from the front, press the switch forward and hold it, the Sky Slider™ will move forward. Release the switch to stop the Sky Slider™ travel at any point. If the S ...

    Enhanced Seat Belt Use Reminder System (BeltAlert )
    BeltAlert is a feature intended to remind the driver and front passenger (if equipped with front passenger BeltAlert ) to fasten their seat belts. The feature is active whenever the ignition is ...