Shift Positions
For additional information on the appropriate use of each transfer case mode position, see the information below:
4WD AUTO
This range is used on surfaces such as ice, snow, gravel, sand, and dry hard pavement.
NOTE: Refer to “Selec-Terrain – If Equipped” in “Starting and Operating” for further information on the various positions and their intended usages.
NEUTRAL
This range disengages both the front and rear driveshafts from the powertrain. It is to be used for flat towing behind another vehicle. Refer to “Recreational Towing” in “Starting and Operating” for further information.
4WD LOW
This range is for low speed four-wheel drive. It locks the front and rear driveshafts together and forces the front and rear wheels to rotate at the same speed. It provides additional traction and maximum pulling power for loose, slippery road surfaces only. Do not exceed 25 mph (40 km/h).
NOTE: Refer to “Selec-Terrain – If Equipped” for further information on the various positions and their intended usages.
See also:
Voice Mail Calling
To learn how to access your voice mail, refer to “Working
with Automated Systems”. ...
General Information
This device complies with Part 15 of FCC rules and with
RS-210 of Industry Canada. Operation is subject to the
following conditions:
1. This device may not cause harmful interference.
2. This de ...
Operation
Voice commands can be used to operate the Uconnect™
Phone and to navigate through the Uconnect™ Phone
menu structure. Voice commands are required after most
Uconnect™ Phone prompts. You wi ...