Trailer Sway Control (TSC)

TSC uses sensors in the vehicle to recognize an excessively swaying trailer and will take the appropriate actions to attempt to stop the sway. The system may reduce engine power and apply the brake of the appropriate wheel(s) to counteract the sway of the trailer. TSC will become active automatically once an excessively swaying trailer is recognized. No driver action is required.

Note that TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the trailer tongue weight recommendations. Refer to “Trailer Towing” in “Starting and Operating” for further information. When TSC is functioning, the “ESC Activation/Malfunction Indicator Light” will flash, the engine power may be reduced and you may feel the brakes being applied to individual wheels to attempt to stop the trailer from swaying. TSC is disabled when the ESC system is in the “Partial Off” mode.

WARNING!
If TSC activates while driving, slow the vehicle down, stop at the nearest safe location, and adjust the trailer load to eliminate trailer sway.

    See also:

    Engine Compartment — 3.6L
    1 — Integrated Power Module (Fuses) 2 — Battery 3 — Engine Oil Dipstick 4 — Engine Oil Fill 5 — Brake Fluid Reservoir 6 — Washer Fluid Reservoir 7 — Engine Coolant Reservoir 8 ...

    Axle Lock (Tru–Lok ) — Rubicon Models
    The AXLE LOCK switch is located on the instrument panel (to the left of the steering column). Axle Lock Switch This feature will only activate when the following conditions are met: • Key in ...

    Wind Buffeting
    Wind buffeting can be described as the perception of pressure on the ears or a helicopter-type sound in the ears. Your vehicle may exhibit wind buffeting with the windows down in certain open or p ...