Towing Requirements – Trailer Brakes

− Do not interconnect the hydraulic brake system or vacuum system of your vehicle with that of the trailer.

This could cause inadequate braking and possible personal injury.

− An electronically-actuated trailer brake controller is required when towing a trailer with electronicallyactuated brakes. When towing a trailer equipped with a hydraulic surge-actuated brake system, an electronic brake controller is not required.

− Trailer brakes are recommended for trailers over 1,000 lbs (454 kg), and required for trailers in excess of 2,000 lbs (907 kg).

CAUTION!
If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity. Failure to do this could lead to accelerated brake lining wear, higher brake pedal effort, and longer stopping distances.

WARNING!
• Do not connect trailer brakes to your vehicle’s hydraulic brake lines. It can overload your brake system and cause it to fail. You might not have brakes when you need them and could have a collision.

• Towing any trailer will increase your stopping distance. When towing, you should allow for additional space between your vehicle and the vehicle in front of you. Failure to do so could result in a collision.

    See also:

    Care Of Fabric Top Windows
    CAUTION! Your vehicle’s fabric top has pliable plastic windows which can be scratched unless special care is taken by following these directions: 1. Never use a dry cloth to remove dust. Instead ...

    Parksense Sensors
    The four ParkSense sensors, located in the rear fascia/ bumper, monitor the area behind the vehicle that is within the sensors’ field of view. The sensors can detect obstacles from approximate ...

    Precautions While Driving With ACC
    In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpectedly. The driver needs to stay alert and may need to intervene. ...