See also:

Shift Positions
For additional information on the appropriate use of each transfer case mode position, see the information below: 2H Position This range is used for normal street and highway driving on hard-surfa ...

Rear Axle Fluid Level Check
The rear axle oil level needs to be between 1/8 in (3 mm) below the bottom of the fill hole and the bottom of the fill hole. The rear axle fill and drain plugs should be tightened to 22 to 29 f ...

Manual Compass Calibration
If the compass appears erratic and the CAL indicator does not appear in the EVIC display, you must put the compass into the Calibration Mode manually, as follows: NOTE: For the most accurate comp ...