See also:

Automatic Unlock Doors On Exit Programming
The “Automatic Unlock Doors On Exit” feature can be enabled or disabled as follows: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON/ RUN an ...

Operating Instructions/Precautions
The transfer case provides four mode positions: • 2H (Two-wheel drive high range) • 4H (Four-wheel drive high range) • N (Neutral) • 4L (Four-wheel drive low range) Four-Wheel Drive Shi ...

Blind Spot Monitoring — If Equipped
The Blind Spot Monitoring (BSM) system uses two radarbased sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that ent ...