Auto-Down
Both the driver and front passenger window switches have an “Auto-Down” feature. Press the window switch past the first detent, release, and the window will go down automatically. To cancel the Auto-Down movement, operate the switch in either the up or down direction and release the switch.
To stop the window from going all the way down during the Auto-Down operation, pull up on the switch briefly.
To partially open the window, press halfway to the first detent and release it when you want the window to stop.
See also:
Trailer Towing
In this section, you will find safety tips and information
on limits to the type of towing you can reasonably do
with your vehicle. Before towing a trailer, carefully
review this information to ...
Loose Fuel Filler Cap Message
After fuel is added, the vehicle diagnostic system can determine if the fuel
filler cap is possibly loose, improperly installed, or damaged. A “gASCAP” message
will be displayed in the odomete ...
Quadra-Trac II Operating Instructions/ Precautions – If Equipped
The Quadra-Trac II transfer case is fully automatic in the
normal driving 4WD AUTO mode. The Quadra-Trac II
transfer case provides three mode positions:
• 4WD HI
• NEUTRAL
• 4WD LOW
...