Adjustable Upper Shoulder Belt Anchorage
In the front seat positions, the shoulder belt anchorage can be adjusted upward or downward to position the belt away from your neck. Push in on the anchorage near your outside shoulder and slide it up or down to reach the position that serves you best.

Adjusting Upper Shoulder Belt
WARNING!
Position the shoulder belt height adjusters so that the belt rests across the middle
of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness
of the seat belt and increase the risk of injury in an accident.
As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you will prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
See also:
Crossing Obstacles (Rocks And Other High Points)
While driving off-road, you will encounter many types of terrain. These varying
types of terrain bring different types of obstacles. Before proceeding, review the
path ahead to determine the corre ...
To Vary The Speed Setting
When the Electronic Speed Control is set, you can increase speed by pushing the
RES (+) button. If the button is continually pressed, the set speed will continue
to increase until the button is re ...
Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/
shoulder belt.
1. Position the latch plate as close as possible to the
anchor point.
2. At about 6 to 12 in (15 to 30 cm) above the latch pl ...


