Help Command

If you need assistance at any prompt, or if you want to know your options at any prompt, say “Help” following the beep. The Uconnect™ Phone will play all the options at any prompt if you ask for help.

To activate the Uconnect™ Phone from idle, simply press the for directions. All Uconnect™ Phone sessions begin with a press of the button and follow the audible prompts for directions. All Uconnect™ Phone sessions begin with a press of the Cancel Command button on the radio control head.

    See also:

    To Engage Or Disengage The Child-Protection Door Lock System
    1. Open the rear door. 2. Insert the tip of the ignition key into the lock and rotate to the LOCK or UNLOCK position. 3. Repeat steps 1 and 2 for the opposite rear door. ...

    Power Door Locks
    The power door lock switch is located on each front door panel. Press the switch to lock or unlock the doors. Power Door Lock Switch If the lock knob is down when the door is closed, the door ...

    Service TPMS Warning
    When a system fault is detected, the “Tire Pressure Monitoring Telltale Light” will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. If the ...