Answer or Reject an Incoming Call - No Call Currently in Progress

When you receive a call on your mobile phone, the Uconnect™ Phone will interrupt the vehicle audio system, if on, and will ask if you would like to answer the call. Press the To reject the call, press and hold the button to accept the call. To reject the call, press and hold the indicating that the incoming call was rejected. button until you hear a single beep, indicating that the incoming call was rejected.

    See also:

    Seat Belt Maintenance
    Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use MOPAR Total ...

    At Each Stop For Fuel
    • Check the engine oil level about five minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will improve the accuracy of the oil level re ...

    Service ACC Warning
    If the system turns off, and the EVIC displays “ACC/ FCW Unavailable Service Radar Sensor”, it indicates there is an internal system fault. Although the vehicle is still drivable under norma ...