Windshield Wiper Operation
Rotate the end of the lever upward to the second detent past the intermittent settings for low-speed wiper operation.
Rotate the end of the lever upward to the third detent past the intermittent settings for high-speed wiper operation.
Front Wiper Control
CAUTION!
In cold weather, always turn off the wiper switch and allow the wipers to return
to the park position before turning off the engine. If the wiper switch is left
on and the wipers freeze to the windshield, damage to the wiper motor may occur
when the vehicle is restarted.
See also:
Brake Master Cylinder
The fluid level in the master cylinders should be checked whenever the vehicle
is serviced. If necessary, add fluid to bring level to the full level mark on the
side of the reservoir of the brake ...
Brake Assist System (BAS)
The BAS is designed to optimize the vehicle’s braking
capability during emergency braking maneuvers. The
system detects an emergency braking situation by sensing
the rate and amount of brake a ...
Parksense Sensors
The four ParkSense sensors, located in the rear fascia/
bumper, monitor the area behind the vehicle that is
within the sensors’ field of view. The sensors can detect
obstacles from approximate ...