Quick Steps To Lowering The Soft Top

Refer to “Lowering The Soft Top” in this section for further information.

1. Remove the side and back windows.

2. Release header latches from the windshield frame.

2. Release header latches from the windshield frame.

3. Release the Sunrider latch (both sides).

3. Release the Sunrider latch (both sides).

4. Open the swing gate and lower the top.

4. Open the swing gate and lower the top.

NOTE: Ensure fabric does not overhang the sides of the vehicle.

Quick Steps To Raising The Soft Top

    See also:

    Call Continuation
    Call continuation is the progression of a phone call on the Uconnect™ Phone after the vehicle ignition key has been switched to OFF. Call continuation functionality available on the vehicle ca ...

    Front Panel(s) Installation With Rear Hard Top Removed
    1. Turn the left and right panels over and move the spacer block (located on the rear of the panel) upward 90 degrees. NOTE: The front panel(s) must be positioned properly to ensure sealing. Set ...

    Voice Command Button
    Actual button location may vary with the radio. The individual buttons are described in the “Operation” section. The Uconnect™ Phone can be used with any Hands-Free Profile certified Bluetoo ...