Auto Unlk On Exit
When ON is selected, all doors will unlock when the vehicle is stopped and the transmission is in the PARK or NEUTRAL position and the driver’s door is opened. To make your selection, press and release the SELECT button until “On” or “Off” appears.
See also:
Seat Belt Maintenance
Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners.
This will weaken the fabric.
Sun damage will also weaken the fabric.
If the belts need cleaning, use MOPAR Total ...
With Tip Start – Automatic Transmission Only
If the engine fails to start after you have followed the “Normal Starting” or
“Extreme Cold Weather” procedures, it may be flooded. To clear any excess fuel,
push the accelerator pedal all ...
Hill Descent Control (HDC) — Four-Wheel Drive Models With MP3023 Two-Speed Transfer
Case Only
HDC maintains vehicle speed while descending hills
during off-road driving situations and is available in
4WD LOW range only. To enable HDC, press the HDC
switch or put the Selec-Terrain™ syst ...


