Display Units In
The EVIC can be changed between English and Metric units of measure. The units apply to the Outside Temperature, Average Fuel Economy, and Distance to Empty.
To make your selection, press and release the SELECT button until “U.S.” or METRIC appears.
See also:
Fluid Level Check
Check the fluid level by removing the fill plug. The fluid level should be between
the bottom of the fill hole and a point not more than 3/16 in (4.76 mm) below the
bottom of the hole.
Add fluid, ...
Fluid Level Check – Brake Master Cylinder
The fluid level of the master cylinder should be checked
when performing under the hood service, or immediately
if the brake system warning lamp indicates system
failure.
The brake master cylin ...
Normal Starting
Using The ENGINE START/STOP Button
NOTE: Normal starting of either a cold or a warm
engine is obtained without pumping or pressing the
accelerator pedal.
To start the engine, the transmission mu ...