Automatic Transmission – If Equipped :: Starting Procedures :: Starting And Operating :: Jeep Wrangler Owner's Manual :: Jeep Wrangler - JeepManuals.org

Automatic Transmission – If Equipped

Jeep Wrangler / Jeep Wrangler Owner's Manual / Starting And Operating / Starting Procedures / Automatic Transmission – If Equipped

Start the vehicle with the shift lever in the PARK position (vehicle can also be started in NEUTRAL). Apply the brake before shifting to any driving range.

See also:

Lap/Shoulder Belt Untwisting Procedure
Use the following procedure to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch pl ...

Side Step Removal – If Equipped
NOTE: Prior to off-road usage, the side steps should be removed to prevent damage. 1. Remove the two nuts from the bodyside. 2. Remove one bolt from the underside of the vehicle. 3. Remove th ...

Seat Belt Extender
If a seat belt is too short, even when fully extended and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a ...