Windshield Wiper Blades

Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non-abrasive cleaner. This will remove accumulations of salt or road film.

Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc.

NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor performance of blades may be present with chattering, marks, water lines or wet spots. If any of these conditions are present, clean the wiper blades or replace as necessary.

    See also:

    Power Door Locks
    A power door lock switch is located on each of the front door trim panels. Use this switch to lock or unlock the doors and liftgate. Power Door Lock Switch Location 1 - Unlock 2 - Lock If y ...

    List All Names In The Uconnect™ Phonebook
    • Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook List Names”. • The Uconnect™ Phone will play the names of all the phonebook entrie ...

    Tilt Mirror In Reverse
    When this feature is selected, the outside rearview mirrors will tilt downward when the ignition switch is in the RUN position and the transmission shift lever is in the REVERSE position. The mi ...